



|
Curriculum
Vitae
Personal information
Name |
Kent Bertilsson |
Date of birth |
1973-02-26 |
Nationality |
Swedish |
Place of living |
Sundsvall |
Academic degrees |
Ph.D.
in solid state
devices, 2005, KTH, Stockholm, Sweden
M.Sc. in
electrical engineering, 1999, Mid-Sweden University, Sundsvall |
Contact Information |
Mid-Sweden
University
Department of information technology and Media (ITM)
Electronics
Design Division
S-851 70 Sundsvall
Swedene-mail:
Kent.Bertilsson@miun.se,
Kent.Bertilsson@seps.se
Phone: +46 60 148915, Fax: +46 60 148456 |
Employment
Time period |
Employer and position |
2008 - |
Employer: |
SEPS Technologies |
Position: |
CEO and Co-founder |
2005 - |
Employer: |
Mid-Sweden
University |
Position: |
Associate Professor
2011 -
Assistant Professor
2010 -
Deputy head of electronic design
division 2009 -
Research Assistant
2005 - 2009 |
2005 - 2008 |
Employer: |
Cree Sweden AB
(former AMDS AB, Instrinsc Semiconductor AB) |
Position: |
Devices design engineer |
1999 - 2005 |
Employer: |
Mid-Sweden
University |
Position: |
Ph. D. Student |
Fields of research
 |
Switch mode power supplies
and transformer technology |
 |
Semiconductor device
design and Optimization |
 |
Silicon carbide devices for switched power and RF power
applications
|
 |
Detector technology (IR-detectors,
position sensitive detectors) |
Scientific
merits
Summary/Highlights
 |
Built up the research activities in the area of switched power
at Mid Sweden University. |
 |
Recieved "Kungliga Skytteanska Samfundet" price to a younger
scientist at Mid Sweden University 2011. |
 | Six
Approved Research applications Grants of more than 11 000 000sek
from VINNOVA, KK Foundation, Swedish Energy Agency an EU whereof
Grant Holder for four projects of 7 860 000 sek.
|
 |
Supervised paper receiving Young Engineer Award at PCIM 2012. |
 | Project leader for
research project
"Research and Development of high speed switch mode power supplies" |
 | Project leader for
research project
"Development of high performance SiC devices" since 2005-2008 |
 | Reviewer for papers in
IEEE trans. on Power Electronics, IEEE Electronic Device
Letter, IEEE Transaction of Electron Devices, IEEE Sensors Journal, Solid State Electronics,
Arabian Journal for Science and Engineering and
Diamond and Related Materials. |
 | Supervisor for four Ph.D.
Students whereof three have successfully reached licentiate degree |
 | 20 papers in
Scientific international refereed Journals. |
 | 35
conference contributions to refereed international research
conferences |
 | 85
citations to published research. |
Industrial and
leadership experience
Summary/Highlights
 | Co-founder and CEO for SEPS Technolgies AB |
 | Deputy head of electronic design division at
Mid-Sweden University |
 |
Leader of "Switched Power" research group at Mid-Sweden
University |
 | 4 years part time employment as semiconductor
device designer at Cree Sweden AB (former Intrinsic Semiconductors
AB and AMDS AB) |
 |
Industrial collaboration with more than 10 different companies in
different sizes |
 |
External representative of management team for "yrkeshögskoleutbildningen,
Avancerad automationstekniker"
|
 |
Participated in leadership training course
|
 |
Approved in course "Supervision of Ph.D. students" in 2008 |
 |
Supervisor for until now four Ph.D. students since 2008 |
Pedagogical merits
Summary/Highlights
 |
Responsible for two educational programmes
"Electrical Power Engineering"
and "International Bachelor program in Electronics" |
 |
Partly developed three educational programmes "Electrical
Power Engineering", "Electronic design for vehicles" and "International Bachelor
program in Electronics" |
 |
Chairman of faculty meetings for the educational subjects
Electrical Engineering and Electronics at Mid Sweden university.
|
 |
Board member of YH-programme for Automation techniques. |
 |
Board member of "Programme Board for International
Educations" at Mid-Sweden University |
 |
Exchange teacher at Tallin Technical University campus Virumaa
in Estonia, April, 2010 |
 |
Exchange teacher at Misr International University in Cairo, Egypt,
2007 |
 | Development and responsible for new summer course for
international students in the usage of advanced equipment in
solid state devices and circuits |
 | Supervised
15 Master thesis projects and about 50 other projects in
electronics |
 | Approved in course
"Pedagogy for higher level education"
in 2000 |
 | Lecturer in electronics at Mid-Sweden University
with course responsibility since 2005 in courses such as:
 |
Sensor systems and measurement technology |
 |
Analog and Digital electronics |
 |
Solid state electronic
devices |
 |
High frequency
electronics
|
|
 | Teaching
laborative courses in analog and digital electronics, micro-controllers, microwave circuits
and sensor systems from 1998 (prior to M.Sc graduation)
|
List of
Publications
-
J. Saleem, A. Majid, K. Bertilsson, T. Carlberg,
“Spot welding Al 6082 sheets with preheating by induction heating process",
submitted to Journal of Electrical engineering and Technology
-
A. Majid, J. Saleem, F. Alam, K. Bertilsson
“Analysis of radiated EMI for power converters switching in MHz frequency
range”, IEEE International symposium on diagnostics for Electric
Machines, Power Electronics and Drives August 27-30, 2013, Valencia.
-
J. Saleem, A. Majid, K. Bertilsson, T. Carlberg
“3 Dimensional Finite Element Simulation of Seam Welding Process”
Journal of elektronika ir Elektrotechnika ISSN 1392-1215, Vol 19, No 8, pp.
75-80, 2013, DOi: 10.5755/j01.eee.19.8.5398
-
A. Majid, J. Saleem, F. Alam, and K. Bertilsson, “EMI
Suppression in High Frequency (MHz) Half Bridge Converter”,
Journal of elektronika ir Elektrotechnika ISSN 1392-1215,
Vol 19, No 8, pp 73-78,
DOi: 10.5755/j01.eee.19.9.5653
-
K. Bertilsson, "Compact
power converter",
Invited presentation at Workshop on Silicon
Carbide Power Electronic Applications, June 2013, Stocholm, Sweden
-
H. B. Kotte, R. Ambatipudi and K. Bertilsson,
"A 45W LLC resonant Converter in MHz Frequency Region for Laptop Adapter
Applications", PCIM 2013, Nürnberg, May 2013
-
R. Ambatipudi, H. K. Babu, K.
Bertilsson, "High Performance Planar Power Transformer with High
Power Density in MHz Frequency Region for Next Generation Switch Mode Power
Supplies", 28th Annual IEEE Applied Power Electronics Conference and
Exposition (APEC 2013), p 2139-43, 2013, DOi: 10.1109/APEC.2013.6520591
-
H. B. Kotte, R. Ambatipudi and K. Bertilsson,
“High Speed (MHz)Series Resonant Converter (SRC) Using Multilayered Coreless
Printed Circuit Board (PCB) Step-Down Power Transformer", IEEE transaction of Power electronics
Vol. 20, No 3, 2013
-
J. Saleem, A. Majid, K. Bertilsson,
T. Carlberg, N. Ul Islam, "Nugget Formation during Resistance Spot
Welding using Finite Element Model",
International Conference on Aerospace, Mechanical, Automotive
and Materials Engineering, Stockholm 2012
-
A. Majid, J. Saleem, K. Bertilsson,
"Design and Implementation of EMI Filter For High Frequency (MHz)
Power Converters", Proceeding of EMC Europe 2012, 17-21 September, 2012,
Rome, DOi: 10.1109/EMCEurope.2012.6396738
-
A. Majid, J. Saleem, K. Bertilsson,
"EMI filter design for high frequency power converters", proceedings of
IEEE International Conference on Environment and Electrical
Engineering, Venice, May 2012
-
K. Bertilsson, "Nästa
generations kompakta spänningsomvandlare", THULE, Kungl. Skytteanska
Samfundets årsbok 2012, Umeå, pp. 153-157
-
R. Ambatipudi, H. K. Babu, K.
Bertilsson, “Effect of Air Gap on the Performance Characteristics of
Transformer for High Frequency (MHz) Switch Mode Power Supplies“, Accepted for publication in INDUCTICA 2012, Coil Winding, Insulation and
Electrical Manufacturing International
-
R. Ambatipudi, H. K. Babu, K.
Bertilsson, “Effect of Dielectric Material on the Performance of
Printed Circuit Board Power Transformers in MHz Frequency Region",
Accepted for publication in INDUCTICA 2012, Coil Winding, Insulation and
Electrical Manufacturing International
-
H. B. Kotte, R. Ambatipudi, S. Haller ,
K. Bertilsson, “A ZVS Half Bridge DC-DC Converter in MHz Frequency
Region Using Novel Hybrid Power Transformer”, in Proceedings of PCIM
Europe 2012, 8 – 10 May 2012, Nuremberg, Germany, pp.399 – 406
-
H. B. Kotte, R. Ambatipudi and K. Bertilsson,
“High Speed Series Resonant Converter (SRC) Using Multilayered Coreless
Printed Circuit Board (PCB) Step-Down Power Transformer”, proceedings of
33rd International Telecommunicatons Energy Conference, 9-13 October 2011,
Amsterdam, The Netherlands.
-
J. Saleem, A. Majid, S. Haller, K. Bertilsson,
"A Study of IGBT
Rupture Phenomenon in Medium Frequency Resistance Welding Machine" ,
International Aegean Conference on Electric Machines and Power Electronics &
Electromotion, 08-10 September 2011 İstanbul, Turkey
-
A. Majid, J. Saleem, H. B. Kotte, R. Ambatipudi, S. Haller, K .Bertilsson,”Analysis
of Feedback in Converter using Coreless Printed Circuit Board Transformer”,
International Aegean Conference on Electrical Machines and Power Electronics
& Electromotion-ACEMP 2011 at Turkey Istambul (September 08-10, 2011)
-
J. Saleem, A. Majid, R. Ambatipudi, H. B. Kotte,
Kent Bertilsson, "High
Frequency Full Bridge Converter using Multilayer Coreless Printed Circuit
Board Step-Up Power Transformer" 20th European Conference on Circuit
Theory and Design, ECCTD2011, August 29 to 31, 2011 Linköping, Sweden
-
A. Majid, H. B. Kotte, S. Haller, R. Ambatipudi, J. Saleem,
K.
Bertilsson "High Frequency Half-Bridge Converter using Multilayered
Coreless Printed Circuit Board Step-Down Power Transformer", proceedings of
8th
Internastional Conference on Power Electronics-ECCE Asia, June 2011, Jeju,
Korea
-
R. Ambatipudi, H. B. Kotte, K. Bertilsson, "Radiated Emissions
of Multilayered Coreless Printed Circuit Board Step-Down Power Transformers
in Switch Mode Power Supplies", proceedings of
8th Internastional Conference on
Power Electronics-ECCE Asia, June 2011, Jeju, Korea
-
H. B. Kotte, R. Ambatipudi, K. Bertilsson,
"High Speed Cascode
Flyback Converter Using Multilayered Coreless Printed Circuit Board (PCB)
Step-Down Power Transformer", proceedings of
8th Internastional Conference on
Power Electronics-ECCE Asia, June 2011, Jeju, Korea
-
J. Saleem, A. Majid, L. Schüberg, and
K. Bertilsson, "Study the
influence of the alignment and nearby metallic objects on the Hall sensor
system for current measurement in Resistance Spot Welding Machine", proceedings of
IEEE International Conference on Environment and Electrical
Engineering 2011, May 2011, Rome, Italy
-
K. Bertilsson, "High frequency power converters", Invited presentation at Workshop on Silicon
Carbide Power Electronic Applications, May 2011, Kista, Sweden,
-
R. Ambatipudi, H. B. Kotte and K. Bertilsson,
“Comparison of Two Layered and Three Layered Coreless Printed Circuit Board
(PCB) Step-down Transformers”, proceedings of 2010 3rd The International
Conference on Power Electronics and Intelligent Transportation System (PEITS
2010)”, November 20-21, 2010, Shenzhen, China.
-
H. B. Kotte, R. Ambatipudi and K.
Bertilsson, “Comparitive results of GaN and Si MOSFET in a ZVS Flyback
Converter using Multilayered Coreless Printed Circuit Board Step down
Transformer”, proceeding of 2010 3rd The International Conference on Power
Electronics and Intelligent Transportation System (PEITS 2010)”,
November 20-21, 2010, Shenzhen, China. .
-
R. Ambatipudi, H. B. Kotte and K.
Bertilsson, “Coreless Printed Circuit Board (PCB) Step-down Transformers
for DC-DC Converter Applications”, Int. Conference on Electrical Machines
and Power Electronics, Issue 71, ISSN: 1307-6892, pp. 370-379, 2010.
-
Hari. B. Kotte, R. Ambatipudi and K.
Bertilsson, ‘’A ZVS Flyback DC-DC Converter using Multilayered Coreless
Printed-Circuit Board (PCB) Step-down Power Transformer”, Int. Conference on
Electrical Machines and Power Electronics, Issue 71, ISSN: 1307-6892, pp.
80-88, 2010
-
C. G Mattsson, G. Thungström, K.
Bertilsson, H.-E. Nilsson and H. Martin, "Fabrication and
characterization of a design optimized SU-8 thermopile with enhanced
sensitivity", Measuremenst Science and Technology, 20, 2009
-
C. G. Mattsson, G. Thungström, H. Rödjegård,
K. Bertilsson, H.-E. Nilsson, H. Martin, "Experimental evaluation
of a thermopile detector with SU-8 membrane, in a carbon dioxide meter setup",
IEEE Sensors Journal, Vol. 9, No. 12, 2009
-
C. G. Mattsson, K.
Bertilsson, G. Thungström, H.-E. Nilsson and H. Martin, "Thermal
simulation and design optimization of a thermopile infrared detector with
SU-8 membrane", Micromachnics and
Microengineering, Vol 19, No. 5, 2009
-
C. G. Mattsson, G. Thungström, K. Bertilsson, H.-E. Nilsson, Hans
Martin, "Design of a Micromachined Thermopile Infrared Sensor With a
Self-Supported Membrane", IEEE Sensors Journal, Vol. 8, No. 12, 2008, pp.
2044-2052
-
H. A. Andersson, K. Bertilsson, G.
Thungström, H.-E. Nilsson, "Processing and Characterization of a MOS-Type
Tetra Lateral Position Sensitive Detector With Indium Tin Oxide Gate Contact",
IEEE Sensors Journal, Vol. 8, No. 10, 2008, pp. 1704-1709
-
C. G. Mattsson, G. Thungström, K. Bertilsson, H.-E.
Nilsson, "Fabrication and evaluation of a thermoelectric IR sensor formed
on a thin photosensitive epoxy membrane with low thermal conductance" in
Journal of Physics: Conf. series, IVC-17 / ICSS-13 and ICN+T 2007 congress,
2007,
-
C. G. Mattsson, G. Thungstrom, K. Bertilsson,
H.-E. Nilsson, H Martin, "Development of an infrared thermopile detector
with a thin self-supporting SU-8 membrane", IEEE Sensors Conference,
2007, pp. 836-839
-
K. Bertilsson, C. I. Harris, "Comparison of Bipolar
and Unipolar SiC Switching Devices for Very High Power Applications",
Materials Science Forum Vols. 556-557, 2007, pp. 975-978
-
S. Intarasiri, A. Hallén, J. Lu, J. Jensen, L. D. Yu,
K.
Bertilsson, M. Wolborski, S. Singkarat, and G. Possnert,
“Crystalline
quality of 3C-SiC formed by high-dose C+-implanted Si”, Applied Surface
Science, Volume 253, Issue 11, 2007, pp. 4836-4842
-
M. O'nils, B. Oelmann,
K. Bertilsson, G.
Thungström, H.-E. Nilsson, "A Project Based Master’s Program for SoF/SoC
based Sensor Systems", Proceedings of the European Conference on
Circuit Theory and Design, 2005.
-
* K. Bertilsson, C. Harris,
H-E. Nilsson, "Calculation of lattice heating in SiC RF power devices",
Solid State Electronics Vol 48 (12), 2004, pp. 2103-2107.
-
* K. Bertilsson, H-E. Nilsson,
"The power of using
automatic device optimization, based on iterative device simulations, in
design of high-performance devices", Solid State Electronics Vol 48
(10-11), 2004, pp 1721-1725.
-
C. Mattsson, K. Bertilsson,
G. Thungström, H.-E. Nilsson, "Manufacturing and characterization of a
modified four quadrant position sensitive detector for out-door applications", Nuclear Instruments and Methods in Physics Research A 531, 2004, pp. 134–139
-
K. Bertilsson, H.-E. Nilsson,
“Optimization of 2H, 4H and 6H-SiC MESFETs for High
Frequency Applications”, Physica Scripta T101, 2002, pp.75-77
-
* E. Dubaric, K. Bertilsson, H.-E.
Nilsson, “Simulations of Submicron
MOSFETs in 2H, 4H and 6H-SiC”, Physica Scripta T101, 2002, pp. 14-17
-
H.-E.
Nilsson, E. Dubaric, M. Hjelm, K. Bertilsson,
“Simulation of photon and
charge transport in X-ray imaging semiconductor sensors”, Nuclear
Instruments and Methods in Physics Research A 487, 2002, pp.151-162
-
* H.-E.
Nilsson, K. Bertilsson, M. Hjelm, E. Dubaric, “Numerical Simulation of Field
Effect Transistors in 4H- and 6H-SiC”, Journal of Wide Bandgap
Materials, Vol. 9, No. 4, 2002, pp. 293-305.
-
* K. Bertilsson, H.-E. Nilsson, “Optimization of 2H, 4H and 6H-SiC high-speed
vertical MESFETs”, Diamond and Related Materials
No. 11, 2002, pp. 1254-1257.
-
K. Bertilsson, M. Hjelm, H.-E.
Nilsson, C. S. Petersson, “Monte Carlo
Simulation of 4H and 6H-SiC short channel MOSFETs”, Proceedings of HITEN 2001,
pp. 79-80.
-
* M. Hjelm, K. Bertilsson, H.-E.
Nilsson, “Full Band Monte Carlo Study of Bulk and Surface Transport Properties in 4H and 6H-SiC”,
Applied Surface Science No. 184, 2001 pp. 194-198.
-
K. Bertilsson, E. Dubaric, G. Thungström, H.-E.
Nilsson, C. S. Petersson, “Simulation of a low atmospherical
noise four-quadrant position sensitive detector”, Nuclear Inst. and
Methods in Physics Research, A, Vol 466 (1), 2001, pp. 183-187.
-
* K.
Bertilsson, H.-E. Nilsson, M. Hjelm, C. S. Petersson, P. Käckell, C. Persson,
“The
Effect of Different Transport Models in Simulation of High Frequency 4H-SiC and
6H-SiC Vertical MESFETs”, Solid-State Electronics, Vol 45 (5), 2001, pp.
645-653.
-
* K. Bertilsson, E. Dubaric, H.-E. Nilsson, M. Hjelm, C. S. Petersson,
“Monte Carlo simulation of vertical
MESFETs in 2H, 4H and 6H-SiC”, Diamond and Related Materials No. 10,
2001, pp. 1283-1286
-
* K. Bertilsson, H.-E. Nilsson, C. S. Petersson,
“Simulation of anisotropic Breakdown in
4H-SiC Diodes”, Proceeding of Computers in Power Electronics -2000,
Virginia Tech, Blacksburg, Virginia, USA, 16-18 July 2000.
* - Included in Ph.D. Thesis, Kent Bertilsson,
“Simulation
and Optimization of SiC Field Effect Transistors”,
ISSN 1650-8599, KTH, Stockholm, 2004
Patents and patent applications
-
K. Bertilsson,
"A transformer", EP2242067A1
-
K. Bertilsson,
"Transformer", US7,978,041 B2
-
C. Harris, K. Bertilsson, A. Konstantinov,
"Silicon Carbide self
aligned epitaxial MOSFET and method of manufacturing the same",
JP2008227486,
-
C. Harris, K. Bertilsson, A. Konstantinov,
"Silicon Carbide self
aligned epitaxial MOSFET and method of manufacturing thereof",
EP1965436
-
C. Harris, K. Bertilsson, A. Konstantinov,
"Silicon Carbide self
aligned epitaxial MOSFET and method of manufacturing thereof",
US20080203398
-
C.Harris, K. Bertilsson, .
Konstantinov, "Method of manufacturing Silicon Carbide self-aligned
epitaxial MOSFET for highe powered device applications",
US20100041195
-
C. Harris, C. Basceri, K. Bertilsson,
"Schottky Diode with
incorporated PN-junctions", EP2033226
-
C. Harris, C. Basceri, K. Bertilsson,
"Schottky Diode with
incorporated PN-junctions",WO2007139487
-
C. Harris, K. Bertilsson, A. Konstantinov,
"Silicon Carbide self
aligned epitaxial MOSFET and method of manufacturing thereof", US7629616
-
C. Harris, C. Basceri, K. Bertilsson, "Semiconductor device",
US20070278609
-
C. Harris, C. Basceri, K. Bertilsson, "Semiconductor device",
US7728403
-
H.-E. Nilsson, H. Olin, K.
Bertilsson, M. Hummelgård
"Nanoelectronic device" in Swedish Patent Application no 0501443-6,
2005
|
Kent Bertilsson |

Kent.Bertilsson@miun.se
Phone: |
+4660 148915 |
Fax: |
+4660 148456 |
Cellular: |
+4670 6864443 |
_______________________
Visiting adress:
Kent Bertilsson
Mid-Sweden University
Åkroken-S 205
Holmgatan 10
Sundsvall
Mailing adress:
Kent Bertilsson
ITM
Mid-Sweden University
S-851 70 Sundsvall
Sweden
|

|